Time; Display Settings - Mercedes-Benz COMAND Operator's Manual

Time

Setting the Time
i The correct time must be set for the
following functions to operate correctly:
Calculation of expected time of arrival
R
Time stamps for calls received and calls
R
dialed
X
Press the W function button or select
System.
X
Select Time £Set Time.
Sets the time
1
Current date
2
X
To set value: Rotate
X
To save setting: Press n.
i
If you adjust the time in 30-minute
increments, the previously selected time
zone and automatic time-zone switching
between daylight saving time and standard
time settings are lost (
i
The increment for setting the minutes is
30 minutes due to GPS reception.
Setting the Time Format
X
Select System£Time£Format.
The format list appears. The R dots show
the current settings.
i The abbreviations mean:
or slide qmr.
ymz
Y page 41).

Display Settings

Time format: HH - Hour, MM - Minute for
either 24-hour clock or AM/PM format
X
To change the format: Rotate
slide qmr.
X
To confirm the change: Press n.
X
To store the setting and exit the menu:
Slide omp.
Setting the Time Zone and Switching
Between Daylight Saving Time and
Standard Time
i
The correct time zone and daylight
saving/standard time must be set for the
following navigation system functions to
operate correctly:
Calculation of expected time of arrival
R
Time stamps for calls received and calls
R
dialed
X
To set the time zone: Select System
£Time£Time Zone.
A time zone list appears. The R dot
indicates the current setting.
X
Select the appropriate time zone.
X
To switch between Daylight Saving and
standard time: Select Daylight Saving
Time (Summer) or Standard Time
(Winter).
The R dot indicates the current setting.
X
To store setting and exit menu:
Slide omp.
Display Settings
Setting the Brightness
i The brightness detected by the COMAND
light sensor affects the setting options for
this function.
X
Select System£Settings£Display
£Brightness.
41
or
ymz
Z