Hardware Page
The Hardware page gives you access to important information and functions of the FireWire Solo.
Sample Rate Detected
This field displays the currently-detected sample rate from the currently selected incoming sync
source.
ASIO/WDM Buffer Size
In this field you can select the buffer size you wish to work with. Smaller buffer sizes result in lower
latency (latency refers to the time it takes for your input signal to pass through your audio software
and appear at the outputs), but may not function well with slower systems.
Sync Source
This field allows you to choose between the FireWire Solo's INTERNAL clock and an EXTERNAL
S/PDIF clock source.
S/PDIF Output Source
Selecting "mixer" routes the signals assigned to the S/PDIF output from the control panel mixer to
the S/PDIF output. Selecting "Pass Thru" allows a surround-encoded stream such as AC3 or DTS
to be sent to the S/PDIF output.
Contact Us
For additional help, technical support is available on our website at www.m-audio.com, where you
can fill out our technical support form.
Alternatively, you can email us at support@m-audio.com, or contact us by phone at: (626) 633-9055
Technical support is available by telephone from 7am - 7pm PST.
7