Introduction Thank you for choosing the M-Audio Fast Track USB. Fast Track USB is your compact, professional audio solution for any Windows or Macintosh computer.* It uses the convenience of USB connectivity, so there’s no need to disassemble your computer and no bulky external power supplies.
< Mac OS X version 10.2.8 “Jaguar” or later, or Mac OS X version 10.3.4 “Panther” or later M-Audio suggests you also check the minimum system requirements for your software, as they may be greater than the above. Front Panel Controls .Input Level –...
10. USB Connector – Connect the included USB cable here, and connect the other end to your computer’s USB port. 11. Line Outputs – Left and Right stereo outputs. Connect these outputs to powered monitors such as the M-Audio DX4s, or to the inputs of your stereo amplifier or receiver.
Fast Track USB’s Control Panel In Windows, you can open the Fast Track USB’s control panel by double clicking on the M-Audio icon in the system tray. If you have more than one M-Audio USB audio interface installer, right click the M-Audio icon in the system tray, and select “Open M-Audio Fast Track USB control panel”.
Page 6
Fast Track USB as the ASIO device in your audio software. Refer to the instructions in your audio software for details. If you are using Session with Fast Track USB, and Fast Track USB is the only M-Audio audio interface installed on your computer, Session selects Fast Track USB’s ASIO driver automatically.
Warranty Terms M-Audio warrants products to be free from defects in materials and workmanship, under normal use and provided that the product is owned by the original, registered user. Visit www.m-audio.com/warranty for terms and limitations applying to your specific product.