Operating System Driver Software; Icp Controller Board Layout - ICP GDT RS Series User Manual

A.5.8 Operating System Driver Software
Drivers for the following operating systems are available:
Operating System
MS-DOS 3.3 to 6.x
Novell NetWare 3.x, 4.x, 5.x
SCO UNIX System V/386 3.2v5.x
SCO UnixWare 2.x and 7
Windows NT, 3.5x, 4.x
Windows 2000
Windows 95/98
Solaris 7
Linux
The following table shows how various devices are integrated by different operating sys-
tems. Please refer to the corresponding chapters of this User's manual and the operating
system documentation for detailed installation information.
Hard Disk
MS-DOS
GDT
NetWare
GDT
UNIX/LINUX
GDT
Win. NT
GDT
GDT: Configurable with ICPCON (some MODs are recognized as a hard disk (see your MOD
manual). In this case, they too can be configured with ICPCON). ASPI: Integration by means
of an ASPI interface. UNIX/LINUX, Win.NT: Supported by the operating system.
A.5.9 ICP Controller Board Layout
The ICP Controller PCB (Printed Circuit Board) has several jumpers. In the following illus-
trations, all jumpers are shown in their factory setting. Under normal circumstances there is
no need to change these settings.
25
Remov. HDD CDROM
ASPI or GDT ASPI
GDT ASPI
GDT UNIX
Win.NT or GDT Win.NT
Driver included with the Controller
Package
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Streamer
ASPI
ASPI
UNIX
Win.NT
WORM MOD
ASPI ASPI/GDT
ASPI ASPI/GDT
UNIX UNIX/GDT
Win.NT Win.NT