Select Interface - ICP GDT RS Series User Manual

Type of Host Drive
Disk
Chain
RAID 1
RAID 0
RAID 4
RAID 5
RAID 10
After loading ICPCON, the following screen appears (by pressing F10 you may toggle be-
tween black and white display or colored display).
J.2.1 Select Interface
„Interface" represents the method of how ICPCON connects with the ICP Controller.
In this example „Win. 9x/NT/2k" means that this ICPCON is the Windows version and is
loaded on a Windows system.
If you press ENTER, ICPCON scans this local system for ICP Controllers. Instead of „Win.
9x/NT/2k" you could also find here „Linux", „NetWare", etc.
Selecting „Sockets" allows for the remote connection of this workstation with servers using
ICP Controllers. You can either choose TCP/IP or IPX/SPX network protocols. In order to ac-
cess the servers with ICP Controllers, the corresponding remote service must be loaded on
the server. In addition the supervisor has to setup users and assign access rights (Name,
password, see also chapter K.9)
Description of Host Drive
1:1 assignment: Host Drive to hard disk
(sometimes also called JBOD)
Concatenation of several hard disks
Mirroring
Data Striping
Data Striping with parity drive
Data Striping with striped parity
Combined RAID 0 and 1
119
Minimum number of hard disks
1
2
2
2
3
3
4