Toshiba 19SL738G Owner's Manual page 10

42SL738G:
*a decoder could
be Digital Satellite or any
other compatible decoder.
media recorder
NOTE: SCART1 can support Canal+ decoder.
Aerial.cables:.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-
Connect the aerial to the ANT socket on the rear of the television. If you use a decoder and/or a media
recorder, it is essential that the aerial cable is connected through the aerial socket on the decoder and/
or on the media recorder.to the TV.
SCART.leads:.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-
Connect the video recorder IN/OUT or decoder TV socket to the television. Connect the media recorder
SAT socket to the decoder MEDIA.REC. socket.
Before running Auto.Scan, put your decoder and media recorder to Standby.
The phono sockets alongside the COMPONENT VIDEO INPUT sockets will accept L and R audio
signals.
The phono sockets alongside the VIDEO INPUT socket will accept L and R audio signals. These
sockets are located on the side of the TV. (See page 18.)
SPDIF (Optical Digital Audio Out) When a digital audio signal is associated with the input selected for
viewing, the digital audio will be available on this SPDIF connection to your home theater system.
®
HDMI (High-Definition Multimedia Interface) is for use with a DVD, decoder or electrical equipment
with digital audio and video output. It is designed for best performance with 1080p high-definition video
signals but will also accept and display VGA, SVGA, XGA, WXGA, SXGA, 480i, 480p, 576i, 576p, and
720p signals.
NOTE: Although this television is able to connect to HDMI equipment it is possible that some equipment
may not operate correctly.
AC-IN
HDMI 1/2/4
1
decoder*
2
PC/HDMI 1
4
(AUDIO)
Digital
Audio
(1) (2)
Y
Y
RGB/PC
9
SETTING UP
NOTE:
SCART1 : (INPUT/TV OUT)
(1)
SCART2 : (INPUT/TV OUT)
(2)
(4) COMPONENT
P /C P /C L AUDIO R
B B R R
P /C P /C L AUDIO R
B B R R
(5) COMPONENT