Optoma ES515 Owner's Manual page 29

Display
Overscan
Overscan function removes the noise in a video image. Overscan the
image to remove video encoding noise on the edge of video source.
Zoom
t
Press to reduce the size of the image.
4
u
Press to magnify an image on the projected screen.
4
H Image Shift
Shifts the projected image position horizontally.
t
Press to move the image left on the projected screen.
4
u
Press to move the image right on the projected screen.
4
V Image Shift (6:9)
Shifts the projected image position vertically (in 6:9 format).
p
Press to move the image up on the projected screen.
4
q
Press to move the image down on the projected screen.
4
V Keystone
t u
Press or to compensate for vertical image distortion when
the projector is positioned at an angle to the screen.
3D
t u
Press or to enable or disable the 3D function. When the 3D
function is enabled, the current picture mode adjustment will be
disabled.
3D Sync invert
Press t or u to enable or disable the 3D Sync invert function to
invert images.
User Controls
9
English