Caring For Your Lawnmower; Replacement Parts - Flymo MULTIMO 340XC Original Instructions Manual

Z1
Z3
Z5
Z7
Cleaning Easi-Reel cable winder (XC Models only)
1. Lift grassbox lid, squeeze together the two catches
(Z7) and remove the cable spool.
2. Clean the cable spool (Z8) and the area it was located
with a soft brush (Z9)
3. Replace the cable spool, ensuring it clicks into place.
Storing your Lawnmower:
• Loosen the wing knobs to enable the handles to be
folded over the product (Z10).
• Store in a dry place where your lawnmower is
protected from damage
At the End of the Mowing Season
1. Replace blade, bolts, nuts or screws, if necessary.
2. Clean your lawnmower thoroughly.
3. Make sure that the electric cable is stored correctly to
prevent damage.
Blade
340XC Reference no.:
360/360XC Reference no.:
420/420XC

Caring for your Lawnmower

Z2
Z4
Z6
Z8

Replacement Parts

FLY062
FLY059
Cleaning
• USE GLOVES
• IMPORTANT:- It is very important that you keep your
lawnmower clean. Grass clippings left in any of the air
intakes or under the deck could become a potential
fire hazard.
1. Remove grass from under the deck with brush. (Z1)
2. Using a soft brush - remove grass clippings from all air
intakes (Z2), the discharge chute (Z3) and the grass
box (Z4).
3. Using a soft brush, remove grass clippings from the
vision window (Z5).
4. Wipe over the surface of your lawnmower with a dry
cloth (Z6).
• IMPORTANT:- Never use water for cleaning your
lawnmower. Do not clean with chemicals, including
petrol, or solvents - some can destroy critical plastic
parts.
Z10
Part no.:
Part no.:
Part no.:
PAGE 9
Z9
521947390
505492090
5107842-01