Other Problems - Zoom MRS-8 Operation Manual

Troubleshooting
• When synchronizing on the MTC (MIDI Time
Code), make sure that the frame rate setting of both
devices is matched and that the external MIDI
device is set to playback standby ( → p. 110).

Other problems

■ Cannot create a new project or copy a
project
• If the write protect switch of the SD card has been
set to the write protect position, data cannot be saved
on the card.
• If the display indicates "FULL", there is no more
free space on the SD card. Change to another SD
card or erase unneeded data to free up space.
■ Cannot save a project
• When a project has been set to write protect status,
overwrite/save cannot be carried out. Turn protect
off ( → p. 107).
• If the display indicates "PRJ FULL", no more
projects can be created on the SD card. Change to
another SD card or erase unneeded projects to free
up space.
■ SD card is not recognized
• Format the SD card in the MRS-8 ( → p. 118).
• The MRS-8 cannot use SD cards with a capacity of
less than 16 MB. If such a card is inserted, the
indication "Too Small" is shown.
122 ZOOM MRS-8