Teletype GPS Software Manual page 25

3. Navigate to the file that you want to copy from your PDA to your PC.
4. Now, you can right-click on that file and select Copy. Then Paste the file onto your PC.
If you desire to create your own waypoint filenames, please follow the procedure below:
Steps For Creating your own Files:
1. Follow the steps to create waypoints in the section,
2. After creating all the waypoints that you need or want, please go to Tools > Waypoints.
3. Here you should see the waypoints that you just created in a folder named general.way.
4. If you want to save the waypoints to a different file, all you have to do is click on
were to have waypoints from Boston, MA to Concord, NH, you might want to name that file Trip1.way
instead of general.way.
5. Then a window will come up and ask you to name the new file. Pick a name that has some meaning to you
regarding what the waypoints are for or any names that you like, such as Trip1.way.
6. Click on Save.
7. The new file that you created is empty. Therefore, you have to copy the waypoints into that file.
8. To copy, you have to select the waypoint that you want to copy.
9. Now, select the name of the file (in this case MA to NH) that you want to paste the waypoint in.
10. Click on the paste button,
11. Now, the waypoint that you wanted to copy should be in this new file called Trip1.way.
See Also:
Creating a Waypoint
Finding An Address
Yellow Pages
Waypoints Window
Creating a Route
© 2006 TeleType GPS
creating a
.
How-To Guide
waypoint.
. For example, if you
19