Power Down Screen - Teledyne 3110 Operating Instructions Manual

Operation
Refer to your computer manual for details on how to setup the
optional RS-232 communications port on your computer.
To download a data log:
1. Use the UP/DOWN keys to navigate to the LOG TRANSMIT
screen. Then press ENTER to enter the setup screen.
2. Press ENTER again to transmit the current data log.
Note: The data set will be transmitted each time you press the
ENTER key. Use the ESC key to exit the LOG TRANSMIT
menu.
3. Press ESC to exit out of the LOG TRANSMIT screen and go
to the home screen.
Note: The Date Log does not need to be stopped in order to
transmit the date.

3.2.19 POWER DOWN Screen

This screen is used to power off the instrument.
To turn the analyzer off:
Teledyne Analytical Instruments
38
1 stop bit
no flow control
Model 3110