Teledyne 3110 Operating Instructions Manual page 12

Introduction
• Display:
• Four-Button User Interface: Operation is performed using the
• Universal AC Charge Adapter: The rechargeable batteries can
• LEDs:
• Contrast Control:
• Auto-ranging:
• Percent of Range Voltage Output: An optional 0-1 VDC
• Real-time Clock:
Teledyne Analytical Instruments
12
downloaded using the instrument's
optional RS-232 interface.
A 2-line 20 character alphanumeric LCD
on the front panel displays data and
operational information through various
screens. The contrast is adjustable for
various lighting conditions.
four front panel mounted buttons. These
buttons are used to enter data, select items
and move through operational screens that
appear on the display.
be recharged without removing them from
the instrument. The charger operates over
the range of 100-240 VAC.
Two front panel mounted LEDs are used
to indicate low battery condition and when
the battery is recharging.
This feature allows the user to easily
adjust the contrast of the display for
optimum viewing under different lighting
conditions. The adjustment is made using
a front panel control dial.
The user is able to specify two analytical
ranges for analysis in the auto mode. The
Model 3110 will automatically switch
between these ranges depending on the
oxygen level.
output is available that represents the
percentage of the current analysis range.
This feature allows the Model 3110 to date
and time stamp the data set recorded on
the data logger. It uses a 24 hour clock.
Model 3110