Teledyne 402R-EU Instruction Manual page 3

Total Hydrocarbon Analyzer
IN ORDER TO AVOID HAZARDOUS CONDITIONS, DAMAGE TO THE
INSTRUMENT, AND TO ASSURE PROPER OPERATION, THE USER SHOULD
READ THIS MANUAL BEFORE INSTALLING AND OPERATING THE 402R-EU
THIS INSTRUMENT SHOULD ONLY BE MAINTAINED BY SUITABLY
TRAINED AND QUALIFIED PERSONNEL.
IF USED OUTSIDE OF THE SPECIFICATIONS (SEE APPENDIX A), THE IN-
STRUMENT MAY BE DAMAGED AND HAZARDOUS CONDITIONS MAY BE
PRODUCED.
Model 402R-EU complies with all of the requirements of the Com-
monwealth of Europe (CE) for Radio Frequency Interference, Elec-
tromagnetic Interference (RFI/EMI), and Low Voltage Directive
(LVD).
The following International Symbols are used throughout the In-
struction Manual for your visual and immediate warnings and when
you have to attend CAUTION while operating the instrument:
STAND-BY, Instrument is on Stand-by,
but circuit is active
Protective Earth
CAUTION, The operator needs to refer to the manual
for further information. Failure to do so may
compromise the safe operation of the equipment.
CAUTION, Risk of Electric Shock
GROUND
Teledyne Analytical Instruments
Table of Contents
iii