1 Introduction
•
Power Connection
•
Analog Outputs
•
Alarm Connections
•
Sensor Connector
Teledyne Analytical Instruments
1-4
AC version: 100–240 V ac, at 50/60Hz.
The connector housing includes the fuse
holder and the power switch.
Fuse Holder: Replacing the fuse is
described in Chapter 5, Maintenance.
I/O Power Switch: Turns the instrument
power ON (1) or OFF (0).
0–10 V dc concentration output.
0–10 V dc range ID (or optional overrange)
output.
4–20 mA dc concentration output, negative
ground.
Alarm 1, Alarm 2, and Sensor Failure Alarm
connections.
Internal Sampling System, Sensor
Connector.
Model 3300
PB