Fluke DDS Function Generator 271 Getting Started Manual page 7

EMC Compliance
This instrument meets the requirements of the EMC Directive 89/336/EEC.
Compliance was demonstrated by meeting the test limits of the following standards:
Emissions
EN61326 (1998) EMC product standard for Electrical Equipment for Measurement, Control and Laboratory Use. Test limits
used were:
a) Radiated:
b) Conducted:
c) Harmonics:EN61000-3-2 (2000) Class A
Immunity
EN61326 (1998) EMC product standard for Electrical Equipment for Measurement, Control and Laboratory Use. Test meth-
ods, limits and performance achieved were:
a) EN61000-4-2 (1995) Electrostatic Discharge: 4 kV air, 4 kV contact
b) EN61000-4-3 (1997) Electromagnetic Field: 3 V/m, 80 % AM at 1 kHz
c) EN61000-4-11 (1994) Voltage Interrupt: 1 cycle, 100 %
d) EN61000-4-4 (1995) Fast Transient: 1 kV peak (ac line), 0.5 kV peak
(signal lines and RS232/GPIB ports)
Class B
Class B
The instrument is Class A by product category.
Performance A.
Performance A.
Performance A.
Performance A.
v