Co Line Group: 1 - PCS Digital System 24 Installation Manual

Programming
2. CO Line – Line Group

CO LINE GROUP: 1

back next chg
PRIVATE TO: Y
back next chg
TOLL OVERRIDE: N
back next chg
DISTINCT TONE: 0
back next chg
ICLID PORT #: 0
back next chg
Note:
Press Next to program another CO Line or
press Hold until screen displays 2. CO Line
Press Next to go to 3. Call Handling
Press Hold to back up one programming menu
Press Clear to exit programming
CO line Groups – are used when programming CO line
access to flexible buttons.
Private To – Is used to establish ringing and exclusive
access at the entered station. Press chg and enter a
valid extension number, Values:
System24 – (10 – 81)
System48 – (100 – 195)
Toll Override – Allows the entered CO line to bypass
and override all toll restriction entries.
Note: Marking this CO line toll override will allow unrestricted dialing.
Distinctive Tone – each CO line can be programmed to
use one of 4 different ring tones. These tones will
override station ring tones.
Incoming Caller ID port – Is required when the system
is receiving Caller ID from the Telephone Company.
Select the port which will be associated with the
external (optional) Caller ID device The default value 0
indicates that no Caller ID will be received on this CO
line and the feature is off. (See Caller ID installation).
Note: The System48 – Always reset this parameter to zero "0" before
entering a two digit (10 – 18) CO Number.
2-11
1. STATION
2. CO LINE
Dialing
3. CALL HANDLING
Call Abandon
4. RESOURCE
CO Line Type
5. RESTRICTION
Loud Bell
6. SYS APPLICATION
Co Line
Group
back next show
Private To
Toll Override
Distinct tone
ICLID Port #