Pbx Auto Pause; Tone Time; Voice Mail Dialing Ratio (Feature No Longer Used) - Xblue Networks 45P Installation & Maintenance Manual

Call Handling
PBX Auto Pause
MBC - 3-09
When a PBX Line port is connected to a CO Line port, specific digit(s) (e.g. "9") are
required to access a PBX CO Line. The system will automatically insert a pause between
these digits when redial features are invoked. This timer determines how long (duration)
the pause will be.
Data Range: 1—9 seconds
Factory Setting: 2 Seconds
Press chg to select.
Tone Time
MBC - 3-10
The Tone time is the length of time that the system will transmit a "DTMF" tone when a CO
Line is accessed.
Data Range: 70—120 milliseconds
Factory Setting: 70 milliseconds
Press chg to select.
Voice Mail Dialing Ratio (Feature No Longer Used)
MBC - 3-11-1 Tone Time
MBC - 3-11-2 Int_Dgt Time
Two sub fields exist for the Voice Mail Dialing Ratio parameter:

• Tone Time:

ing systems connected to the system analog ports. The Tone Time is the min-
imum duration of DTMF tone delivered to the Voice Mail analog port for voice
processor - call processing.
• Int_Dgt Time (Interdigit Timer)
log interface voice processing systems connected to the system analog ports.
The Int_Dgt Time is the minimum duration of time between DTMF tones
delivered to the Voice Mail analog port for voice processor – call processing.
142
This timer is relevant only for analog interface voice process-
XBLUE Networks
: This timer is relevant only for ana-