Time - Date" Menu - Honeywell SDC Operating Instructions Manual

SDC / DHC
NOTE
Application
Access
Setting
Returning
EN2H-0220GE51 R0308
4.2.1

"Time - Date" menu

The following current calendar values can be specified in this
menu:
• Time
• Year
• Day - Month
• Time change mode (summer / winter time)
All listed daytime values are set at the factory and generally do
not need to be updated.
An internal, pre-programmed calendar ensures automatic time
change on the annually recurring summer / winter time switchover
dates. If necessary, the automatic time change can be
deactivated. The current weekday, Mo to Su is determined from
the calendar date and does not need to be set.
Corrections for rare fault cases
See 4.2 Menu-selection level, pg. 31
► Turn input button
► Turn input button
(time, year, day - month, change).
► Press input button
turning the input button
► Press input button
► Turn input button
values.
Returning to the basic display takes place by pressing the
button or automatically after the set information time (see
4.1.2.7 "System information" button, pg. 26).
Pos: 28 /156-Honeywell/Bedienung/Menue_Schaltzeiten @ 1\mod_1207644798369_6.doc @ 9540
î
and select the "Time - Date" menu.
î
and select the desired calendar value
î
and change the corresponding value by
î .
î
to confirm the set value.
î
to select and change additional calendar
Operation
33