Honeywell SDC Operating Instructions Manual page 38

Operation
Select
heating circuit:
Select day
Mo-
and cycle:
Hcy-1
Change:
Start of
heating
Change:
End of
heating
Change:
Temperature
38
Switching time programming (programs P2 and P3 disabled)
Upon accessing the menu-selection level, the "Timeprograms"
menu always appears first.
Enabling of programs P2 and P3 in the "System Parameters"
menu (see 4.2 Menu-selection level, pg. 31).
HC MC -1
Mo-
Hcy-2
Monitoring
HC Direct heating circuit
MC-1 Mixed heating circuit 1
MC-2 Mixed heating circuit 2
DHW Hot-water heating circuit
Hcy Heating cycle
MC -2 DHW
Tu-
Mo-
Hcy-1
Hcy-3
Only appears if there are switching
times in the second heating cycle.
Return to the basic display:
Default
time
We
Th
Su-
Fr
Hcy-3
Sa
Return:
EN2H-0220GE51 R0308
SDC / DHC
Copy
circuit
Copy
day
3 s