System Information" Button - Honeywell SDC Operating Instructions Manual

Operation
4.1.2.7
¤
Exceptions
NOTE
26

"System information" button

Calls up system information, such as temperatures and counter
data.
The information on the outside temperature appears first after the
¤ button is pressed. Turning the input button
system temperatures and the counter and consumption states
and operating states of the connected system components to
appear. Pressing the input button
setpoint values to appear.
Collector flow temperature:
Solar tank temperature:
Outside temperature:
The displayed information (see the following example) is
independent of the installed or enabled system components and
control circuits.
î
î
causes the respective
No setpoint
No setpoint
Averaged value
EN2H-0220GE51 R0308
SDC / DHC
causes the