Know Your Deep Fryer - Wolfgang Puck BDFR0020 Bistro collection Manual

Know Your Deep Fryer

• Lid with viewing window and permanent filter
•
Drain Lock
•
Oil Pan Front
•
Housing
•
Basket clip with
MAX food level
Assembled Fryer in
cooking position
•
Oil pot with drain tap
•
Control Panel
•
Heating Element
• Magnetic Release Power Cord
•
Frying Basket with folding handle
Basket in elevated position for
loading or food draining
6
Using Your Deep Fryer
Assembling your Deep Fryer for Use
1 Place the Deep Fryer housing on a stable, level surface.
2 Ensure that all components of your Deep Fryer are
completely dry prior to use to avoid risk of injury due
to spattering.
figure 1
3 Insert the oil pot into the Deep Fryer housing ensuring
that the front of the pot (the front is indicated by the
tap) is placed at an angle into the housing.
(See figure 1).
4 Line up the control panel into the grooves on the rear
of the Deep Fryer housing. Your Deep Fryer is equipped
with a safety microswitch which will not allow the control
figure 2
panel to work unless it is properly seated into both
grooves in the housing. (See figure 2).
5 Add the appropriate amount of oil to the oil pot.
Do not fill with oil above the maximum level or below
the minimum level marked on the inside of the Deep
Fryer pot. (See figure 3).
6 Attach the Magnetic Release Power Cord into the
figure 3
receptacle on the back of the housing. Only use the
approved receptacle marked TA-35P in your unit.
To attach the receptacle ensure that the nubs on the
magnetic end of the cord are on the right side of
the plug (TA-35P) in order to line up with the plug
receptacle on the Control Panel. (See figure 4).
7 Unfold the basket handle and ensure that it is locked
figure 4
into place. (See figure 5).
8 Place the basket into the basket holder inside the pot.
(See figure 6)
figure 5
figure 6
7