Adaptec Storage Manager Information Manual page 2

- The Adaptec Storage Manager User's Guide contains complete installation
instructions for the Adaptec Storage Manager software. The Adaptec
RAID Controllers Command Line Utility User's Guide contains
complete installation instructions for ARCCONF, Remote ARCCONF,
and the Adaptec CIM Provider. The Adaptec RAID Controllers
Installation and User's Guide contains complete installation
instructions for Adaptec RAID controllers and drivers.
2.1 Supported Operating Systems
- Microsoft Windows*:
o Windows Server 2008, 32-bit and 64-bit
o Windows Server 2008 R2, 64-bit
o Windows SBS 2011, 32-bit and 64-bit
o Windows Storage Server 2008 R2, 32-bit and 64-bit
o Windows Storage Server 2011, 32-bit and 64-bit
o Windows 7, 32-bit and 64-bit
*Out-of-box and current service pack
- Linux:
o Red Hat Enterprise Linux 5.7, 6.1, IA-32 and x64
o SuSE Linux Enterprise Server 10, 11, IA-32 and x64
o Debian Linux 5.0.7, 6.0 IA-32 and x64
o Ubuntu Linux 10.10, 11.10, IA-32 and x64
o Fedora Linux 14, 15 IA-32 and x64
o Cent OS 5.7, 6.2, IA-32 and x64
o VMware ESXi 5.0, VMware ESX 4.1 Classic (Agent only)
- Solaris:
o Solaris 10,
o Solaris 11 Express
- FreeBSD:
o FreeBSD 7.4, 8.2
2.2 Minimum System Requirements
o Pentium Compatible 1.2 GHz processor, or equivalent
o 512 MB RAM
o 135 MB hard disk drive space
o Greater than 256 color video mode
2.3 General Setup Notes
- You can configure Adaptec Storage Manager settings on other
servers exactly as they are configured on one server. To
replicate the Adaptec Storage Manager Enterprise view tree
and notification list, do the following:
1. Install Adaptec Storage Manager on one server.
2. Start Adaptec Storage Manager. Using the 'Add remote system'
action, define the servers for your tree.
3. Open the Notification Manager. Using the 'Add system'
action, define the notification list.
4. Exit Adaptec Storage Manager.
5. Copy the following files onto a diskette from the directory
where the Adaptec Storage Manager is installed:
RaidMSys.ser --> to replicate the tree
RaidNLst.ser --> to replicate the notification list
RaidSMTP.ser --> to replicate the SMTP e-mail notification list
RaidJob.ser --> to replicate the jobs in the Task Scheduler
2