Monster GreenPower HTS 1900G Owner's Manual page 29

optional syncing Instructions
The HTS 1900G is synced to the HT 300RF to turn GreenPower outlets on and off . However, if you wish to sync
an additional HTS 1900G to the same HT 300RF, you can do so by following these instructions .
The syncing switch is located on the bottom right side of the HTS 1900G . Use a non-metal, thin pointed object
such as a toothpick to press in the syncing switch .
It is recommended to sync the unit BEFORE installing the HTS 1900G in a rack system so the syncing switch
on the bottom of the unit is accessible .
To enable Rf alert buzzer
1 . Hold sync switch for one second
2 . Unit will beep ONCE
3 . Release switch right after beep sounds
To Disable Rf alert
1 . Hold sync switch for one second
2 . Unit will beep TWICE
3 . Release button right after beep sounds
21