Monster SUPERTHIN Installation Manual And Warranty page 18

Routing your TV's Power cord and aV cable
through the cable Management System (cont'd)
4
Route your TV's power cord through the
bottom cable channel.
5
Route AV cable from your wall, set-top box,
AV receiver, or other source through the
top channel, as shown to the right and make
connections to your TV.
6
Slide the cable channel covers back into place.
Cable channels are in place when you hear
them click.
7
Plug the TV power cord into an AC outlet.
NOTE: DO NOT run power and AV
cables in the same channel, as this may
cause electrical interference that can
affect picture and sound quality.
congratulations
You've successfully installed your Monster SuperThin
Visit us at www.MonsterCable.com/FlatScreen for more innovative Monster FlatScreen products.
FlatScreen Mount.
™
18