Table of Contents
Advertisement
Actiontec Wireless-Ready DSL Gateway User Manual
Encapsulation
If the Gateway is configured to obtain an
static
address, select the appropriate encapsulation option used by the ISP (
IP
Bridged or
1483
RFC 1483
Note: Contact the
Unnumbered Mode/VIP Mode
If a block of public static
Unnumbered Mode by clicking in the appropriate check box. Then, enter the IP
Address and Subnet Mask in the "Gateway Address" and "Unnumbered Subnet
Mask" text boxes below the "Unnumbered
and Restart to make all changes permanent.
The Unnumbered Mode feature automatically configures the appropriate
ing for the
Address block. The
IP
-to-
to be routed WAN
Note: The
when purchasing a block of public static
ISP
the
if this information was not received.
ISP
Routed).
if unsure of the proper configuration.
ISP
addresses was purchased from the
IP
route will bypass
IP
, as well as
LAN
LAN
Address information should be obtained from the
IP
address through
IP
Address." Click Next, then click Save
IP
, enabling the public
NAT
-to-
.
WAN
address. Contact
IP
56
or to specify a
DHCP
RFC
, select
ISP
rout-
IP
IP
s
Advertisement
Table of Contents
