Teledyne AX300 Operating/Service Instructions Manual page 28

Operating Instructions
– DON'T –
Use this analyzer if you suspect any malfunction.

Use the analyzer in the presence of flammable gases.

Use anything but alkaline batteries.

Autoclave or freeze the sensor or analyzer.

Open or try to repair a leaking or broken sensor.

Immerse the unit or sensor in any liquid.

Pass hot or cold gas mixtures over the sensor.

Expose the unit to devices that produce high levels of radio, short

wave, microwave, x-ray, or high frequency interference.
Use cleaning agents or liquids in the cable receptacles or around the

battery compartment.
Place the unit in a water vapor-saturated environment.

Expose the LCD to excessive sunlight.

Expose the unit to a condensing water environment such as a mist

tent.
Teledyne Analytical Instruments
AX300
20