ACR Electronics NAUTICAST 2607 User Manual page 51

b) Region Settings
A Region is a defined area, with specific VHF parameters, which are sent out by Vessel Traffic
Service Stations (VTS), and received via Digital Selective Calling (DSC) or AIS.
The screen shows a list of Regions, and their input sources. When the vessel enters into one of the
pre-defined Regions, the NAUTICAST™ automatically switches to the relevant Region Setting. If a
Region Number is vacant, then the relevant Region Name Slot is currently unoccupied.
Tip: For fast Region Selection, press the Region Number on the keyboard and the selected region is
immediately displayed.
o
N 1 18' E
*********** Region Settings ************
..Name....Valid...Source.......DaysOld..
1>Region 1
2>Region 2
3>Region 3
4>Region 4
5>Region 5
6>Region 6
7>Region 7
8>Region 8
9>Region 9
In use:Region 6
----------------------------------------
NUM| Select->|
Dynamic Keys: Region Settings
[M5] [Select]
[M6] [New]
Overview of Region Settings
Name
Region Number
Valid
OK
Source
A:AddrChM
B:BcastChM
C:AIS_ChAs
D:DSC_Ch70
M:OpManual
Period of time Region Setting is
DaysOld
stored
In use Region 6
Y1-03-0203 Rev. M
o
0 12' |1>0.10|2>1.30|3>1.80nm
OK A:AddrChM 2 06:21:59
OK B:BcastChM 37 09:36:14
OK ? N/A N/A
OK M:OpManual 23 11:02:40
OK C:AIS_ChAs 10 12:39:17
OK D:DSC_Ch70 27 05:56:34
OK C:AIS_ChAs 9 17:08:46
New | |<-Back
Confirm Region
[M8]
Number Selection
Create New Region
Number of pre-defined Region
Status of Region Setting - OK: Stored and Valid
A: Addressed Channel Management (Msge. 22)
Source: VTS via AIS
B: Broadcast Channel Management
(Msge. 22)
Source: VTS via AIS
C: AIS Channel Assignment Sentence
Source: Manual ECDIS Input
D: Channel 70 Telecommand
Source: Digital Selective Calling
M: Operator Manual Input
Source: Via Display
Days, hours, minutes, seconds
(dd hh:mm:ss)
Region Setting of vessel current operation
Return to Menu
[Back]
Configuration
51