Ship Settings (User Password Protected) - ACR Electronics NAUTICAST 2607 User Manual

3.5.4 Ship Settings (User Password Protected)

After a new User Password has been set, the Ship Settings may be input. The Ship Settings are
usually only set once, upon NAUTICAST™ initial operation.
A selection is made with the cursor buttons [Up] or [Down] for input field selection. The category
"ShipType" is equipped with default settings, which can be selected by pressing the [Left] or [Right]
buttons.
NOTE: The default password from the factory is mentioned on your AIS display at the
protection foil. (see Appendix 7.2 for password information).
Before entering Ship Settings for initial NAUTICAST™ operation, it is advised to configure the
User Password in:
Menu 5: Configuration
Submenu 1: Change User Password
After the User Password has been set, Ship Settings may be input.
N48^12' E 16^26' |1> N/A|2> N/A|3> N/Anm
************ Ship Settings *************
Call Sign:SO52
ShipName :SOLAS 52
Ref.Points
Len (A+B):
Beam(C+D):
Ship Type: N/A or no ship
>>> DATA OK. PRESS M5 TO SAVE DATA <<<
----------------------------------------
NUM|
| Save
Dynamic Keys: Input of Ship Settings
[M5] [Save]
Y1-03-0203 Rev. M
ext int
A: 170m 171m
B: 30m 29m
C: 15m N/A
D: 15m 30m
200m 200m
30m 30m
Save | | | Back
| | | Back
Confirm Data Input [M8]
/\ +
/ \|
| |
| A
| |
| +--|
| | B
| | |
+-C-+D-+
Return to Main
[Back]
Menu
43