Sony VPH-D50HTU Installation Manual page 93

Blanking adjustment
3
Adjust the shift with the arrow keys.
V : The picture is shifted upward.
v : The picture is shifted downward.
b :The picture is shifted rightward.
B :The picture is shifted leftward.
4
Press the MEMORY key to save the adjustment data.
If the displayed picture is larger than the screen, cut off the excess parts.
1
Press the BLKG key.
2
Press the POSITION +/– keys to select the part to be adjusted.
• When you press the + key, the position cycles through the following
order:
TOP n BOTTOM n LEFT n RIGHT n TOP
• When you press the – key, the position cycles in reverse order.
ADJ:
NEXT:
3
Adjust with the arrow keys.
• Press the V and v keys to adjust the TOP and BOTTOM positions.
• Press the B and b keys to adjust the LEFT and RIGHT positions.
4
Press the MEMORY key to save the adjustment data.
Note
When you connect two or more RGB input sources to the projector, such as when
using the switcher, adjust the picture size, picture shift and blanking for each RGB
signal that has a different characteristic. The characteristics are shown in the
INPUT INFO menu.
Screen
Picture
ADJ:
+ –
93
Adjustments (GB)