Section 1 - How The Searchlight Works; Section 2 - Preparing To Install - ACR Electronics RCL-75 Product Support Manual

SECTION 1 - HOW THE SEARCHLIGHT WORKS

The RCL-75 was specially designed for mariners who require a high
intensity remote controlled searchlight that is compact, light weight and
can stand up to the tough marine environment.
The RCL-75 searchlight system contains an intense light beam that
produces 180,000 peak candlepower by combining two 55W halogen
lamps with unique optical quality, parabolic reflectors. All functions of
the searchlight can be electrically operated by remote control from the
pilot area of the vessel using the remote control Point Pad™ and
interconnecting cable supplied with the RCL-75.
The sleek, robust design and modern construction materials of the
searchlight body makes it attractive for recreational and commercial
vessels. The searchlight is made of a UV resistant ASA plastic to
minimize yellowing, and is gasketed and finished to repel the weather.

SECTION 2 - PREPARING TO INSTALL

Unpacking the RCL-75
Before proceeding with the installation of the RCL-75, please verify that
the content of the box includes the following:
QTY
1 Light assembly
1 Deck mount
17' wire harness
1
Remote control Point Pad™ and extra
1
cover for flush mounting
4 S/S Allen bolts
4 S/S nuts
4 S/S flat washers
4 S/S lock washers
1 Special L wrench (Allen wrench and
Phillips head screwdriver)
U clamps for remote control Point Pad™
2
flush mount
1 Mounting gasket
1 Surface mount gasket
1 Flush mount gasket
1 Product Support Manual
1 Light base mount template*
1 Remote control panel template (flush)*
1 Remote control panel template (surface)*
*Templates are on a separate sheet in this box.
Y1-03-0158H
ITEM ACR PART NUMBER
A3-06-2177
A1-18-1724
9426
9428
A1-05-0734-1
A1-05-0736
A1-05-0741
A1-05-0737
T1-04-0047
A1-17-1366
A1-25-0132
A1-25-0135-1
A1-25-0135-2
Y1-03-0158
Y1-03-0158-1
Y1-03-0158-1
Y1-03-0158-1
3