Clamping The Cables; Connecting To An Analogue Video Cassette Recorder - Mitsubishi Electric DX-TL4509E Installer Manual

Connections (continued)

Clamping the cables

1. Put the supplied cable clamping band into the
step
clamper hole on the rear panel.
• There are 2 clamper holes on the unit, for power
cable and USB cable.
2. Put the cable to be clamped through the cable
step
clamping band as illustrated below.
• Face the serrated surface of the band inside.

Connecting to an analogue video cassette recorder

To VIDEO OUT
connector
20
To AUDIO OUT
connector
Commercially available audio cable
Commercially available video cable
3. Pull the edge of the cable clamping band until it
step
stops.
To AUDIO IN
connector
To VIDEO IN
connector
Analogue video cassette recorder