Table of Contents
Advertisement
SELECT PROGRAM Selects a program to be used among PRG1,
DISPLAY
OFF
ON
INPUT
BRIGHTNESS
CONTRAST
COLOR
HUE
SHARPNESS
FRAME/FIELD
SIGNAL TYPE
AUTO
NTSC
PAL
CANCEL
PROGRAM MENU
PRG2 and PRG3.
S e l e c t s w h e t h e r t o d i s p l a y t h e s e t t i n g
information such as the number of prints on
the monitor or not.
The setting information is not displayed.
The setting information is displayed.
INPUT MENU
Selects VIDEO or S-VIDEO according to the
input signal.
Adjusts brightness of the printing image. (The
whole image will be adjusted.)
Adjusts contrast of the printing image. (The
image will be adjusted based on the black
level.)
Adjusts density of the printing image. The
colour of the image gets deeper with
lighter with
.
Adjusts the hue of the printing image.
Controls apertures and reinforces or softens
the contour of image. (Adjustmemt for input
signal)
The value gets smaller, the contour gets softer.
The value gets larger, the contour gets reinforced.
Select FRAME for normal use. Select FIELD
for a picture of quickly moving objects. When
FIELD is selected, the print image will be
lower in resolution.
Detects NTSC signal and PAL signal.
This unit automatically detects NTSC signal
or PAL signal.
Select NTSC when an image of NTSC signal
is not displayed correctly.
Select PAL when an image of PAL signal is
not displayed correctly.
When the ENTER button is pressed while
CANCEL is selected, the settings in the
INPUT menu are return to those before
change. The changes are not saved.
and
33
Advertisement
Table of Contents
