Table of Contents
Advertisement
SETTING THE FUNCTIONS
AUTO CLEAR
OFF
ON
CLEAR KEY
PART
PAGE
ALL
•
This function is carried out when the CLEAR/STOP button is
pressed for one second or more during stand-by mode.
BUZZER
OFF
ON
REMOTE SET
BUSY LEVEL
LOW
HIGH
•
The default setting is "HIGH".
BUSY 1&2 SELECT
PRINT BUSY
OFF
BUSY1
BUSY2
BUSY1&2 This unit outputs BUSY1 and BUSY2 signals
42
The printed memory image is not cleared.
The printed memory image is cleared after
completing printing.
When the CLEAR/STOP button is pressed,
an image of currently selected frame of a
multi-image page will be cleared.
When the CLEAR/STOP button is pressed,
all images of currently selected page will be
cleared.
When the CLEAR/STOP button is pressed,
all memorized images will be cleared.
Selects whether the buzzer sounds or not
when any button on this unit is pressed.
Does not sound the buzzer.
Sounds the buzzer.
Selecting the remote signal, etc.
Selects the level of BUSY signal from the
remote terminals 1 and 2 on the rear panel.
This unit cannot accept the remote input
signal when the signal is "LOW".
This unit cannot accept the remote input
signal when the signal is "HIGH".
Selects when the BUSY signal is
outputted from the remote terminals 1 and 2
on the rear panel.
This unit does not output the BUSY signal
regarding printing.
This unit outputs BUSY1 signal during
printing.
This unit outputs BUSY2 signal during
printing.
during printing.
Advertisement
Table of Contents
