Table of Contents
Advertisement
PROGRAM
1
Press the MODE button in stop mode.
¡
The program screen will appear.
2
Select a track using K/L
buttons, then press the
ENTER button.
3
Press the PLAY button.
¡
Playback will start in the programmed order.
¡
While the program is being played back, the STOP button works
as follows:
Press the STOP button once and then the PLAY
button again, and playback will restart from the point where the
STOP button was pressed (Program continued).
Press the STOP button twice and then the PLAY
button again, and playback will restart from the track in the
usual way (Program cleared).
Notes
¡
Adding programs is not possible during program
playback. You must stop the current playback before
such operations can be carried out.
¡
Press the CLEAR button to cancel a program. The
most recently entered program will then be deleted.
¡
Up to 99 programs can be entered.
¡
Playback from a desired track and random playback
are not available during program playback.
¡
Program settings are cleared when the power is
turned off or the disc loading tray is opened.
1
Press the MODE button in stop mode to display
the program setting screen.
2
Select a group using o/p buttons, then press
the ENTER button.
¡
The track select screen will be displayed.
¡
It takes approximately five
seconds until a track selection
screen appears.
3
Select a track using o/p buttons and press the
ENTER button.
¡
To return to the group select screen from the track
select screen, press the RETURN button.
4
Press the PLAY button.
Notes
¡
It may take time for all the respective track times to
be displayed.
¡
The programmed content is retained until the power
CD
is turned off or the tray is opened.
¡
During program playback, TITLE, MENU, Arrow and
ENTER buttons on the remote controller are disabled.
¡
When the designated program playback ends, it
PROGRAM
CD [AUDIO]
TOTAL 0:00:00
changes to stop mode.
2
5:02
3
1:22
4
4:35
5
3:49
6
3:05
PLAYBACK OF ALL GROUPS
7
4:18
1/3
1/1
ENTER
PLAY
CLEAR
PROGRAM
CD [AUDIO]
TOTAL 0:04:35
1
2
5:02
4
4:35
3
1:22
4
4:35
5
3:49
6
3:05
7
4:18
2/3
1/1
ENTER
PLAY
3
1:22
CLEAR
2
Images can be enlarged on the screen to your taste.
1
¡
An image will be enlarged at the center of the screen.
¡
Pressing the ZOOM button cycles the zooming
images in three steps.
1
DVD-A
¡
The zooming frame can be moved from the center 4
steps to the right, 4 steps to the left, 4 steps to the
top, and 4 steps to the bottom when 2 time zooming.
The frames will move 6 steps when 4 time zooming.
PROGRAM
(In the 1.3-time zoom display, just one step can be
DVD-AUDIO
Total 00:04:35
shifted up and down as well as right and left.)
1
52:43
1
4 04:35
2
45:02
3
41:22
¡
Current position will be displayed on the right
4
34:35
5
13:49
6
33:05
bottom of the screen. Press the ENTER button, and
7
24:18
1/2
1/1
ENTER
PLAY
3
41:22
the display disappears.
CLEAR
PROGRAM
1
Total 00:04:35
1
02:02
1
4 04:35
2
01:22
3
04:35
4
03:49
5
03:05
6
04:16
7
02:55
2/3
1/1
ENTER
PLAY
2
01:22
CLEAR
Note
¡
Zooming function does not work while disc menu is shown.
¡×
4 zoom is not available on some discs.
¡
For Video CDs, only 2 times zooming is available.
– 20 –
Press the MODE button
in stop mode to display
the all group screen.
Press the PLAY button.
ZOOM PLAYBACK
(enlargement on-screen)
DVD-RW
Press the ZOOM button during playback.
×1.3
×2
K
/
L
/s / B
When the cursor (
during zoom play, the part to be zoomed moves.
DVD-A
ALL GROUP
DVD-AUDIO
TOTAL 1:40:53
ALL GROUP PLAYBACK
- - no indication - -
PLAY
DVD-V
VCD
×4
) button is pressed
EN
1L25
Advertisement
Table of Contents
