Table of Contents
Advertisement
LOADING RIBBON CARTRIDGE
Be sure to turn on the power of this unit before loading a ribbon cartridge.
When you change the ribbon cartridge, remove the
ribbon cartridge in this unit by pressing the RIBBON
EJECT button.
When you use the unit for the fi rst time, this operation is not required.
Remove slack in the ink ribbon.
Turn the gear in the direction of the arrow (backside of the ribbon
cartridge) to remove slack.
• If slack is left, the ink ribbon may be damaged when loaded.
• Do not turn the gear of the side without the arrow. Turning it may
cause slack in the ink ribbon.
Insert the ribbon cartridge into the ribbon cartridge
loading slot.
• Be sure to hold the handle.
• Insert the ribbon cartridge in the direction of the arrow with the
marking of "TOP SIDE" up.
The installation of print paper and ribbon cartridge is
completed.
• Do not leave more than 15 sheets of print paper on the print outlet.
• Be sure to install the paper cassette properly. If it is not installed
properly, a paper jam may occur.
• Replace print paper and ribbon cartridge at the same time.
Do not put your hand inside the product from the paper cassette
loading slot or ribbon cartridge loading slot. This product has
mechanical parts (switches and rollers) and parts that are heated to
a very high temperature or sensitive to static electricity.
NOTE
NOTE
CAUTION
gear
(backside of the ribbon cartridge)
21
Advertisement
Table of Contents
