Figure 17. Blade Antennas 110-340 And 110-341 Outlines And Dimensions - ACR Electronics Cobham C406-1 Series Abbreviated Component Maintenance Manual

COBHAM AVIONICS WULFSBERG ELECTRONICS
ABBREVIATED COMPONENT MAINTENANCE MANUAL
C406-1 (453-5002), C406-1HM (453-5003)
INSTALLATION NOTES:
1. MOUNT ANTENNA USING #10-32 SS MACHINE
SCREWS AND ASSOCIATED HARDWARE.
72548( 72  “ /%,1  “ 1‡FP
2. PROVIDE 0.625 (5/8") (16 MM) Ø HOLE
FOR BNC CONNECTOR.
3. PROVIDE 0.213 (5.4 MM) Ø HOLES (6 PLCS)
FOR ATTACHING HARDWARE.
4. BONDING THROUGH MOUNTING SCREWS
NOT REQUIRED.
5. APPLY A LAYER OF ANTI-CORROSION BONDING
GREASE BETWEEN AICRAFT AND ANTENNA BASE.
6. GASKET NOT SUPPLIED AND USE OPTIONAL.
REQUEST P/N 280-0340 IF ONE IS DESIRED.
0.201 (5.1) Ø (6 PLCS)
1.25 (32)
0.750 (19.1)
1.500
(38.1)
Dimensions in inches (mm)
INSTALLATION NOTES:
1. MOUNT ANTENNA USING #10-32 SS MACHINE
SCREWS AND ASSOCIATED HARDWARE.
72548( 72  “ /%,1  “ 1‡FP
2. PROVIDE 0.625 (5/8") (16 MM) Ø HOLE
FOR BNC CONNECTOR.
3. PROVIDE 0.213 (5.4 MM) Ø HOLES (6 PLCS)
FOR ATTACHING SCREWS.
4. THIS ANTENNA BONDED BY THE BASE PLATE
BONDING THROUGH MOUNTING SCREWS
NOT REQUIRED.
5. APPLY A LAYER OF ANTI-CORROSION
BONDING GREASE BETWEEN AICRAFT
AND ANTENNA BASE.
RF CONNECTOR BNC FEMALE
0.200 - 0.207 Ø (6 PLCS)
(5.1 - 5.3 Ø)
2.05 MAX (52)
Dimensions in inches (mm)

Figure 17. Blade Antennas 110-340 and 110-341 Outlines and Dimensions

30º
7.75
(197)
0.625 (15.9)
1.620 (41.2)
3.000
1.160 (29.5)
(76.2)
6.000
(152.4)
8.25
(210)
3.80 EST
(97)
3.15 EST
(80)
4.90 MAX
(125)
2.38
(61)
25-62-10
15º
C.G.
2.70
(69)
2.89
(73)
RF CONNECTOR BNC FEMALE
0.562 (14.3)
2.25
(57)
110-340
10.1 MAX
(257)
C.G.
3.8 MAX
(97)
0.90 (23)
1.19 (30)
1.06 (27)
1.38 (35)
110-341
Page 62 of 90
APR 06/10