Fisher-Price B1637 Owner's Manual page 6

Assembly
9
• Pull both rear legs out until they "snap" into place.
10
Front
Base
• Place the rear base on a flat surface so that the buttons
face the front base.
• While pressing the buttons on each side of the rear base,
fit the rear legs onto the rear base. Push the rear legs down
until the buttons on the rear base "snap" into the holes
in each rear leg.
Pull
Rear
Leg
Pull
Rear
Leg
Rear
Legs
Press
Button
Press
Button
Rear Base
Pull Up
Rear Legs
11
• While standing on the rear base, pull the rear legs up.
They should remain secured to the rear base. If you can
remove the rear legs, you have not assembled them cor-
rectly to the rear base. Reread and repeat assembly step 10.
• Set the frame assembly aside for Assembly step 21.
Seat Tube
Long Ends
Ridges
12
Top of Seat
• Position the seat face down, with
the top of the seat facing you.
• Position a seat tube so that the long
end is upright and toward you and the curved end is toward
the outside edge of the seat.
• Insert the curved end of the seat tube through the holes in
the ridges on the seat back.
• Repeat this procedure to assemble the other seat tube to
6 the seat.
Pull Up
Rear Base
Curved
End