Fisher-Price B1637 Owner's Manual page 5

Assembly
5
• Position the holder so that the hole in the holder aligns with
the hole in the front leg.
• Insert the M4 bolt through the holder, front leg and into the
lock nut. Tighten the bolt.
Holder
6
• Fit the bottom of the remote into the cupped portion of
the holder.
• Push to "snap" the top of the remote under the holder clips.
Holder
Front Leg
M4 Bolt
Shown Actual Size
Remote
Clips
Housing
Hole
Slot
Front
Legs
7
• Position the housing so that the hub is inward.
• While pressing the button on the top of a front leg, insert it
into the housing slot, as shown. Push the front leg until the
button "snaps" into the hole in the housing.
• Repeat this procedure to assemble the motor housing to
the other front leg.
• Pull the front legs down to be sure they are secure in the
housings. If you can remove them, you have not assembled
them correctly. Please re-read and repeat this assembly step.
8
• Position a rear leg so that the tapered end is upright.
• While pressing the button on the top of the rear leg, insert it
into the housing short tube, as shown. Push the rear leg until
the button "snaps" into the hole in the short tube.
• Repeat this procedure to assemble the other rear leg to the
motor housing short tube.
• Pull the rear legs down to be sure they are secure in the
housings. If you can remove them, you have not assembled
5 them correctly. Please re-read and repeat this assembly step.
Hub
Press
Buttons
Motor
Housing
Motor Housing
Short Tube
Button
Rear Legs
Tapered
End