Fisher-Price B1637 Owner's Manual page 15

Storage
• Fit the bottom of the remote into the
cupped portion of the holder.
• Push to "snap" the top of the remote
under the holder clips.
• Press the button on the inside of each
housing and push the rear legs toward
the front legs. Stand the frame against a wall for storage.
Press
Buttons
Clips
Care
The pad is machine washable. Wash the pad separately in cold
water on the gentle cycle. Do not use bleach. Tumble dry sep-
arately on low heat and remove promptly. The frame, tray and
sound 'n lights tray may be wiped clean using a mild cleaning
solution and a damp cloth. Do not immerse the sound 'n
lights tray.
Upper
Pad
Pocket
Elastic
Loops
To remove the pad:
• Unhook the four elastic hooks from the pegs on the seat
back and bottom.
• Push the restraint belts back through the slots in the pad.
• Slide the upper pad pocket off of the seat back.
• Slide the lower pad pocket off of the seat bottom.
To replace the pad:
• Refer to Assembly steps 23 - 25.
Note: This product has no consumer serviceable parts. Do not
take this product apart.
15
Elastic
Loops
Lower
Pad
Pocket
Restraint
Belts