Table of Contents
Advertisement
Assembly
Elastic
Loop
25
• Fit the bottom edge of the pad around the bottom edge
of the seat.
• Hook the elastic loops on each side of the pad to the peg
on the back of the accessory bins.
26
• Position the lights 'n sounds tray on a flat surface, with the
roller facing you.
• Position the mirror base, with the mirror toward you.
• Fit the mirror base onto the lights 'n sounds tray.
Assembly
Elastic
Loop
27
• Turn the assembly over. Insert four #8 x 1
bottom of the lights 'n sounds tray and tighten.
Assembly is now complete.
Battery Installation
Hint: When swinging, sound or power L.E.D. slows/dims/stops,
it's time to replace the batteries! We recommend using alkaline
batteries for longer battery life.
Mirror Base
Lights 'n
Sounds Tray
• Locate the battery compartment door on the swing frame.
• Insert a coin into the battery compartment door and pry the
battery compartment door off of the swing frame.
• Insert four "D" (LR20) alkaline batteries as indicated inside
the battery compartment.
• Replace the battery compartment door.
10
/
3
#8 x 1
" Screw - 4
8
Shown Actual Size
/
" screws into the
3
8
Battery
Compartment
Door
Swing
Advertisement
Table of Contents
