Mitsubishi Electric XL7000U User Manual page 35

Menu operation (continued)
FEATURE menu (continued)
ITEM
ADVANCED MENU
VIDEO SIGNAL
SETUP
SCART INPUT
LAMP WARNING
HIDE OSD
RESET ALL
with the SCART terminal.
SETTING
ENTER
AUTO / NTSC / PAL / SECAM
/ 4.43NTSC / PAL-M / PAL-N /
PAL-60
AUTO
OFF
ON / OFF
STANDARD
SHORT TERM
OFF
ON
OK
FUNCTION
The ADVANCED MENU is displayed for the following settings.
When AUTO is selected, the appropriate video format is
automatically selected depending on the input signal. If the image
isn't displayed correctly, select the desired video format manually.
Select to change the SETUP mode automatically.
Select to make black lighter.
Select to make black thicker.
up cancel function for the U.S. Choose OFF when the image is
dark.
Choose ON when connecting the projector with a device equipped
with the SCART terminal that can output RGB signal. SCART
terminal is used mainly in Europe. Choose OFF normally. (Available
only for the input signal from the COMPUTER/COMPONENT/VIDEO
IN 1 terminal.)
When the lamp operating time exceeds 3000 hours with LAMP
MODE set to LOW, a warning dialog is displayed.
When the lamp operating time exceeds 3800 hours with LAMP
MODE set to LOW, a warning dialog is displayed.
Select this option for normal use.
The no-signal dialog, input dialog, SCART warning dialog, auto
power-off dialog, lamp warning dialog, and abnormal temperature
dialog aren't displayed.
The menu settings are reset to the factory defaults (except the
LANGUAGE, PASSWORD FUNCTION, IMAGE CAPTURE, and
NETWORK settings).
't projected.
't compatible with this projector.
EN-35