Mitsubishi Electric XL7000U User Manual page 16

Setting up your projector (continued)
(or the ARC is adjusted in the  direction)
Press the 
button.
Adjusting the origin to the vertical arc
the ARC is adjusted in the  direction)
Press the 
button.
the ARC is adjusted in the  direction)
Press the 
button.
When you press the  or  button in the RESET
mode, the distortion correction is reset.
Press the 
button.
Press the 
button.
Press the 
button.
Press the 
button.
Press the 
button.
Press the 
button.
Press the 
button.
Press the 
button.
Press the 
button.
Important:
the resolution decreases. In addition, stripes may
appear or straight lines may bend in images with
complicated patterns. They are not due to product
malfunctions.
the displayed image may be distorted.
projector and the screen or the correction amount
of the CURVED-mode adjustment, you may not
obtain a complete rectangular screen or the correct
aspect ratio. Slight distortion can be corrected by
the CORNERSTONE-mode adjustment.
CURVED-mode adjustment because of the type
of the video signal being projected and the setting
values of the CURVED-mode adjustment. In such
cases, set the CURVED-mode adjustment values
in the range where the image is displayed without
noise.
adjustment and the CURVED-mode adjustment
in combination, the adjustment range becomes
narrower than that in the case where you carry out
these adjustments individually. When setting the
arc setting value of the CURVED-mode adjustment
to 16 or larger, you cannot use the KEYSTONE-
mode adjustment.
while the option lens is in use, you may not be
able to obtain a perfectly rectangular image or
the correct aspect ratio. Slight distortion can
be corrected by the CORNERSTONE-mode
adjustment.
EN-16