Mitsubishi Electric XL7000U User Manual page 37

Menu operation (continued)
NETWORK menu
NETWORK
ITEM
PROJECTOR NAME
NETWORK CERTIFICATION
NETWORK PASSWORD
IP CONFIG
DHCP
IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY
MAC ADDRESS
SAVE SETTINGS
CONTROL SYSTEM
NETWORK RESET
NETWORK RESTART
opt.
PROJECTOR NAME
NETWORK
ON
CERTIFICATION
NETWORK
ENTER
PASSWORD
IP CONFIG ENTER
CONTROL SYSTEM
STANDARD
NETWORK RESET
OK
NETWORK RESTART
OK
SETTING
*****...
ON / OFF
ENTER
ENTER
ON
OFF
***.***.***.***
***.***.***.***
***.***.***.***
xx-xx-xx-xx-xx-xx
OK
STANDARD
AMX
CRESTRON
OK
OK
opt.
NETWORK
IP CONFIG
DHCP
IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY
MAC ADDRESS
SAVE SETTINGS
FUNCTION
Set the name to identify the projector. Enter up to 15 characters
(alphabets or numeric characters). (See page 44.)
Select whether to enable the network certification or not. Select ON
for normal use. (See page 44.)
Set the password for Web control or PJLink™ certification. (See page
44.)
Select this setting for IP Configuration. (See page 45.)
Select this setting when you obtain IP CONFIG automatically by
DHCP server.
Select this setting when you set IP CONFIG manually.
Press the ENTER button to set IP ADDRESS. When DHCP is set to
ON, you cannot change this setting.
Press the ENTER button to set SUBNET MASK. When DHCP is set to
ON, you cannot change this setting.
Press the ENTER button to set DEFAULT GATEWAY. When DHCP is
set to ON, you cannot change this setting.
Displays MAC ADDRESS.
Saves the IP CONFIG settings. When the IP CONFIG is not changed,
you cannot select SAVE SETTINGS.
Select this setting when using ProjectorView Global+ or ProjectorView.
(See pages 46 and 51.)
Select when using a controller made by AMX. (See pages 46 and 51.)
Select this setting when using the controller or software of Crestron
Electronics, Inc. (See pages 46 and 51.)
Resets the Network Setting. (See page 47.)
Press the ENTER button to restart the network function.
EN-37
ON
0. 0. 0. 0
0. 0. 0. 0
0. 0. 0. 0
OK