Mitsubishi Electric DLP WD8200U User Manual page 38

Menu operation (continued)
FEATURE menu (continued)
ITEM
SCART INPUT
LAMP WARNING
HIDE OSD
LAMP 1 TIME RESET OK
LAMP 2 TIME RESET OK
FILTER TIME RESET
RESET ALL
with the SCART terminal.
SETTING
ON / OFF
STANDARD
SHORT TERM
OFF
ON
OK
OK
FUNCTION
Choose ON when connecting the projector with a device equipped
with the SCART terminal that can output RGB signal. SCART
terminal is used mainly in Europe. Choose OFF normally. (Available
only for the input signal from the COMPUTER/COMPONENT VIDEO
IN-1 terminal.)
When the lamp operating time exceeds 3000 hours with LAMP
MODE set to LOW, a warning dialog is displayed.
When the lamp operating time exceeds 3800 hours with LAMP
MODE set to LOW, a warning dialog is displayed.
Select this option for normal use.
The no-signal dialog, input dialog, SCART warning dialog, auto
power-off dialog, lamp warning dialog, and abnormal temperature
dialog aren't displayed.
The LAMP 1 operation time is reset to 0.
The LAMP 2 operation time is reset to 0.
The filter operation time and the cleaning count is reset to 0.
The menu settings are reset to the factory defaults (except the
LANGUAGE, PASSWORD FUNCTION, IMAGE CAPTURE, and
NETWORK settings).
't projected.
't compatible with this projector.
EN-38