Specifications - Mitsubishi Electric DLP FD730U User Manual

Specifications

Type
Model
Rated power supply
Power consumption
Display Technology
Colors
Projection lens
Light source lamp
Picture size
PC compatibility
Video compatibility
Speaker
S-video input
Video input
Audio input
Analog RGB input
HDMI input
Control connector
Outside dimensions
Weight
Length of power cord
Temperature, humidity
(performance guaranteed)
• The specifications and outside appearance of the projector are subject to change without prior notice.
DLP™ projector
FD730U/FD730U-G
100 - 240 V AC, 50/60 Hz
4.2 A
During standby: 0.5W (when STANDBY MODE is LOW)
0.65-inch single chip Digital Micromirror Device (DMD)
Pixels: 1920 x 1080 = 2073600 pixels
16770000 colors
F 2.4-2.8, f = 20.6-30.1 mm
280 W
40–300 inch (Wide) (aspect ratio 16:9)
Maximum resolution: 1920 x 1080 dots (Compressed in the case of 1600 x 1200 dots)
Panel resolution: 1920 x 1080 dots
NTSC/NTSC 4.43/PAL (including PAL-M, N)/SECAM/PAL-60
Component Video (DVD/HDTV) (480i, 576i, 480p, 576p, 1080i, 720p, 1080p)
10 W mono x 1
Luminance signal: 1.0 Vp-p 75 Ω (negative sync.)
Chroma signal: 0.286 Vp-p 75 Ω (burst signal)
1.0 Vp-p 75 Ω (negative sync.)
350 mVrms, 10 kΩ or more
RGB: 0.7 Vp-p 75 Ω (negative sync.)
YP P /YC C :
B R B R
Y: 1.0 Vp-p (negative sync.)
P P /C C : 0.7 Vp-p
B R B R
HD/CS: TTL level (positive or negative)
VD: TTL level (positive or negative)
HDMI 19-pin
HDMI interface (TMDS single link) (only PCM audio is supported)
SERIAL terminal (RS-232C), LAN terminal (RJ-45)
345 x 134 x 270 mm (width x height x depth)
Approx. 4.3 kg
71 inch (1.8 m)
+41°F (+5°C) - +95°F (+35°C), 30 - 90%
EN-44