Table of Contents
Advertisement
Specify Alert Notification Events
PAM can be configured to report a variety of alerts, by email, popup
message or both. This section describes how to tell PAM what to report
and which method to use.
1. Click on the Message Agent icon
you wish to modify.
2. In the Information View, scroll down to see the Add Events window.
Figure 5-10. Specifying Events for Alert Notification.
3. From the left column, select an Event you want reported.
4. Right click on the Email column. Select Yes or No from the popup
menu.
5. Right click on the Popup column. Select Yes or No from the popup
menu.
Selecting Yes adds that item to the Email or Popup list. Selecting No
deletes the item. Use the checkboxes at the bottom to set all Events
or Popups to Yes or No.
6. When you are finished, click the Change button.
Device
The term Devices refers to a Promise RAID product: a FastTrak or
SuperTrak card, or an UltraTrak RAID Subsystem.
There are no control functions in PAM for Devices. But you can access
information about them. To do so, select the Device icon
Monitoring and Maintenance
whose alert notification events
57
in Tree View.
Advertisement
Table of Contents
