Table of Contents
Advertisement
Promise Array Manager
Access the Message Agent
The Message Agent resides on the RAID PC and
sends the monitoring data to the Message Server
and on to the Monitoring Utility.
1. In the Tree View, right-click on the Message
Agent icon and select Login from the popup
menu (right).
Figure 3-4. The Message Agent login dialog box.
2. In the Message Agent login dialog box, type in the Username and
Password in their respective fields.
Note: Contact your IT Administrator if you don't know this information.
3. Click OK to access the Message Agent.
UltraTrak Users
These instructions pertain to the RAID PC
connected to the UltraTrak subsystem. You
must successfully complete this connection
before any remote monitoring connections will
function.
1. When you log into the Message Agent, you
should see the UltraTrak icon and the
Controller icon
(right). If you do, your connection is correct.
If you set up your UltraTrak with an array before installing PAM on your
PC, you will also see the array and drives.
below it in Tree View
22
Advertisement
Table of Contents
