Delete a Message Server
If the Server's IP address has changed, it will no
longer function. You must delete the existing Server
and create a new one with the current IP address.
1. Right click on the Message Server icon
Tree View.
2. Select Delete from the popup menu (right).
Disconnect a Message Server
Logout of RAID Server
When you are about to perform maintenance or repair on a RAID server,
use this procedure. This action will preserve your connection settings.
PAM will still see the Message Server and show a disconnected status.
Note: This is the only correct way to log out a RAID Server from the
system.
To disconnect a Message Server, select it in Tree
View then click the Disconnect button
Toolbar, or:
1. Right click on the Message Server icon
View.
2. Select Disconnect from the popup menu (right).
Reconnect a Message Server
To reconnect a message Server you have taken offline,
select it in Tree View then click on the Connect button
in the Toolbar, or:
1. Right click on the Message Server icon
View.
2. Select Connect from the popup menu (right).
Monitoring and Maintenance
in
in the
in Tree
in Tree
49