Installation; Setting Up; Installation Setting Up; Low Batteries - Geemarc t-LOOP Instruction Manual

INSTALLATION

Setting Up

NOTE: Ensure your telephone equipment is UL/ETL approved
before connecting the Geemarc t-LOOP. Please refer to your tele-
phone user guide.
Open the battery compartment found on the back of the Geemarc t-
LOOP. Insert the 2 supplied alkaline batteries (AAA size, 1.5V type)
into the battery compartment. Check the battery polarity diagrams
in the battery compartment when inserting the batteries. Replace
the battery cover.
Note: The Geemarc t-LOOP must not be connected to the telephone
when installing the batteries.
Do not use rechargeable batteries. Do not put batteries into the
household rubbish, pay attention to battery regulations regarding
battery disposal.

Low Batteries

The low battery indicator will turn red to indicate the batteries should
be changed. The indicator will only turn red while in use. Replace
the batteries as soon as possible.
5