Introduction - Geemarc t-LOOP Instruction Manual

INTRODUCTION

Congratulations on purchasing your Geemarc t-LOOP amplified
powered neckloop from Sound SolutionsTM. The Geemarc t-LOOP
can be used with cellular or landline telephones together with a
hearing aid that has a t-coil. The Geemarc t-LOOP can also be used
as an amplified audio neckloop for a variety of audio devices using
the 2.5mm to 3.5mm adapter provided.
This neckloop uses an induction loop system which helps people
who use a hearing aid to hear sounds more clearly because it
reduces or cuts out background noise. The Geemarc t-LOOP
transforms the sound emitted by an telephone/audio device into an
acoustic field compatible with hearing aids set to the T position.
Simply plug the neckloop into your telephone and you can make and
receive calls as normal without needing to hold the telephone. The
microphone in the Geemarc t-LOOP allows you to speak directly to
the caller.
Note: users of digital hearing aids must make sure their aids
have been programmed for use with the 'T' setting.
This neckloop can be used with telephones equipped with a 2.5mm
microphone/headset socket (Geemarc products such as AMPLI
Dect, CL200, 400, 600, 1400 are good examples). It is also com-
patible with most mobile telephones (you may need to purchase a
connector if your cellular telephone does not have a suitable 2.5mm
headset socket).
Its is important that you read the instructions below in order to use
your Geemarc t-LOOP to its full potential. Keep this user guide in a
safe place for future reference.
3